Ocean freight

FCL or LCL? Making the right choice in container shipping

When you ship by sea, the first decision is whether to use a container on your own or share it with other cargo. In this guide we explain the difference between FCL and LCL, how costs are built up, the main container types, and what to watch out for when shipping through Mersin port.

  • Published:
  • Updated:
  • 5 min read
  • By the Sağlam Company team

What are FCL and LCL?

Full container load (FCL) means the entire container is reserved for a single shipper. It is loaded with your cargo, sealed, and usually travels unopened all the way to its destination. Even if you don't fill it completely, you pay for the whole container.

Less than container load (LCL) is shared container shipping. Your cargo goes into the same container as goods from other shippers. A consolidator collects the shipments at a container freight station (CFS) and fills the container; at destination, the container is opened and the cargo is distributed to each consignee. You pay only for the volume or weight your cargo takes up.

How pricing works: what are you paying for?

With FCL, pricing is per container: ocean freight, port and terminal charges, and documentation fees are all calculated per unit. The more cargo you fit into the container, the lower your cost per cubic metre.

With LCL, pricing is usually based on volume or weight, whichever is greater. This is the "W/M" (weight or measure) rule; most tariffs treat 1 tonne and 1 cubic metre as the same unit. Warehouse, consolidation and distribution charges are added on top. That is why LCL usually costs more per cubic metre than FCL, but for small shipments the total comes out noticeably lower.

Rates change frequently depending on the trade lane, the season, the freight market and port charges. The most reliable way to compare is to get quotes for the same cargo under both options.

When comparing total cost, look beyond ocean freight at every door-to-door item: trucking from the loading address to the port, export customs, port charges, unloading and distribution fees at destination, import customs and final delivery. With LCL, warehouse and distribution charges at destination can turn out higher than expected, so always ask whether these items are included in the quote.

At what volume does FCL make sense?

There is no fixed cut-off point; the threshold shifts with the trade lane and the time of year. As a rule of thumb: if your cargo is close to or above roughly half of a 20-foot container, get an FCL quote alongside the LCL one. Beyond that point, a full container often costs about the same or less overall, and involves less handling.

Volume isn't the only factor. FCL may be worth considering even for smaller volumes in these cases:

  • Fragile, valuable or damage-prone cargo, since every extra handling step adds risk.
  • Shipments with a critical delivery date, since LCL needs extra days for consolidation and distribution.
  • Goods that could be affected by odour, moisture or dust, or that could affect other cargo.
  • Situations where you don't want to risk being held at customs because of another shipper's cargo in the same container.

On the other hand, LCL is usually the better choice for samples of a few pallets, regular but small shipments, or trial shipments to a new market.

Container types and dimensions

Below are the approximate internal dimensions of the most common dry containers. Values can vary by a few centimetres between manufacturers; the maximum gross mass is shown on the CSC plate on each container's door, and the tare and maximum payload are marked on the door.

Approximate internal dimensions of standard dry containers
TypeInternal dimensions (length × width × height)Volume (approx.)Typical use
20' standard (20DC)5.90 × 2.35 × 2.39 m33 m³Heavy, dense cargo: metal, stone, machine parts
40' standard (40DC)12.03 × 2.35 × 2.39 m67 m³Bulky general cargo
40' high cube (40HC)12.03 × 2.35 × 2.69 m76 m³Light but bulky cargo: furniture, textiles, packaging

Although a 20-foot container is smaller in volume, it is often the preferred choice for heavy cargo: a 40-foot container doubles the volume but does not increase the payload in the same proportion. Road weight limits on the way to the port are another deciding factor. There are also special types such as refrigerated (reefer), open top and flat rack containers.

Under SOLAS rules, the container's verified gross mass (VGM) must be submitted to the carrier before it is loaded onto the vessel. Without this declaration, the container will not be loaded.

What to watch out for when shipping from Mersin port

Mersin International Port is one of the largest container ports in the Eastern Mediterranean and is widely used for exports thanks to its proximity to the industrial regions of southern and southeastern Türkiye. This makes it easy to access regular services for both FCL and LCL. When we organise ocean freight, we also plan the inland connection to the port.

With FCL, the empty container is usually brought to the loading address by truck, filled and sealed at the factory or warehouse, and then delivered to the port. Vessel cut-off times, customs procedures and the VGM submission must all be completed before this delivery.

With LCL, the cargo is usually delivered to the consolidator's warehouse. Ask in advance about receiving hours and packaging and labelling requirements, and always state whether your pallets can be stacked.

Once the free time at the port and for container use has expired, waiting charges such as demurrage and storage start to accrue. Preparing your documents before the vessel date, especially the bill of lading instructions and customs paperwork, is the easiest way to avoid these costs.

For cargo leaving Mersin, it is also important to complete the export declaration before the cut-off, to declare dangerous goods (IMDG) in advance, and to stow and secure the cargo properly inside the container. Poor stowage increases the risk of damage and can cause problems with insurance claims.

A quick checklist for your decision

  1. What are the total volume and gross weight? Do you know the number and dimensions of the pallets?
  2. Can the cargo be stacked? Is it fragile?
  3. How flexible is the delivery date?
  4. Is this a one-off shipment or a regular one?
  5. Who will receive the cargo at the destination port and who will handle customs clearance?
  6. How do the delivery terms (Incoterms) determine who pays the ocean freight and port charges?

Send us these details via our quote request form and we can price the same cargo as both FCL and LCL for a side-by-side comparison.

Frequently asked questions

Is LCL cargo slower?

Generally, yes. Even if the sea voyage is the same, collecting the cargo at the warehouse, filling the container, and then unpacking and distributing it at destination all take extra time. If your delivery date is critical, build this difference into your planning.

Do I have to fill the container completely with FCL?

No. You pay for the whole container, but you don't have to fill it. Use lashing and dunnage to keep the cargo from shifting in the empty space.

Should I choose a 20-foot or a 40-foot container?

For heavy, dense cargo a 20-foot container is often enough; for bulky, light cargo a 40-foot or 40-foot high cube (HC) container is more efficient. Volume and weight need to be assessed together.

Last updated: November 2026. This article is for general information only; regulations and practice can change. For your own case, check the current situation with us or the competent authority.

Let us price FCL and LCL for your cargo side by side

Tell us the type of goods, volume, weight and destination; we'll compare both options and recommend the one that suits you best.